2025 Epiroc Rotary Blasthole Drill Rigs DM30 XC
- Year 2025
- Make Epiroc
- Model Rotary Blasthole Drill Rigs
2025 Epiroc Rotary Blasthole Drill Rigs DM30 XC
2025 Epiroc Rotary Blasthole Drill Rigs DM30 XC
Product descriptionThe Epiroc DM30 XC blasthole drilling rig is a crawler mounted, hydraulic tophead drive, multi-pass rotary or DTH drilling rig featuring a 9.1 m (30 ft) drill pipe change. With a starter rod under the rotary head, the DM30 XC has a total clean depth capacity of 45.1 m (148 ft), dependent on the drill pipe size.
The DM30 XC is designed to handle 101.6 mm (4 in) up to 159 mm (6-1/4 in) drill pipe. The drill has a weight on bit of 20,000 kgs (44,000 lbs). Selection of either a low- or a high-pressure compressor makes it suitable for rotary or DTH drilling applications.
Operational
Operating Conditions
Pulldown: 0 lbf - 40 000 lbf | Pullback: 0 lbf - 13 000 lbf
Dimensions
Length
Tower up: 32,3 ft| Tower down: 46,9 ft
Height
Tower up: 48,5 ft | Tower down: 16,7 ft
Width
16,7 ft
Dimensions
Hole diameter: 6.75 - 10.62 inch (171 - 270 mm)
Depth, Maximum
Single pass: 28 ft | Maximum hole: 148 ft
Weights
Weight
On bit: 40 000 lbs | Estimated: 70 000 lbs - 78 000 lbs
Features
Features
Product series: DM| Drilling method: Single-Pass and Multi-Pass