2025 Epiroc Production drill rigs Simba SM60 S

Information

2025 Epiroc Production drill rigs Simba SM60 S

Precise production drilling with higher consistency

The robust Simba SM60 S is a long-hole production drill rig designed for small to medium-drift mining. The horseshoe-mounted drill unit frame minimizes the transport height, while providing outstanding robustness and stability during rock drilling. Simba SM60 S has the capability to drill parallel holes with 1,5 meters spacing in the side walls and drilling up and down. This production drill rig accommodates a range of drill bits and rock drills to adapt to your specific needs.

Built to perform

The Simba SM60 S production drill rig utilizes the latest technology in regard to autonomous operations and drilling consumables to ensure high performance and increased efficiency. The entire machine is built to have a minimal transport height, to ensure optimal performance in smaller drifts. While still offering all the valuable options that our Simba customers expect for maximum efficiency.

Photos

Highlights

  • Bensalem, Pennsylvania
  • 2025
  • Epiroc
  • Production drill rigs Simba SM60 S
  • Hydrostatic transmission: Clark 12000
  • Available
  • 1 980 mm
  • roof up/down: 3 010 mm/2 310 mm | over drill centre: 88 mm

Specifications

  • 2025
  • Epiroc
  • Production drill rigs
  • Simba SM60 S
  • Horizontal
  • Torque at 1 300 rpm: 390 Nm
  • Water cooled oil
  • Hydrostatic transmission: Clark 12000
  • SAHR
  • Tyres: Michelin 12.00 x R20
  • 2 x 12 W, 70 Ah
  • Impact rate: 60 Hz | System: 24 V |Frequency: 50 Hz - 60Hz | Voltage: 380 - 1 000 V | Total installed power: 63 kW | Main motor: 1 x 55 kW
  • Rotation torque, max: 640 / 1 000 Nm | Feed force: 15.0 kN | Boom extension: BUT 28 |
  • Rotation speed 0-340/ 0-215 rpm | Tramming speed: >12.5 km/h
  • Sound level: <106 dB(A)
  • Tramming lights: LED 8 x 25W, 24V DC | Working lights: LED 4 x 50W, 24V DC
  • jacks, front: 2 extendable | jacks, rear: 2
  • Hydraulic: 200 bar | System pressure, max: 150 - 230 bar
  • Drill rod length: 3 090 mm | Cable reel: 660/1 395mm | Feed roll-over: 360° | Feed extension: 1 250 mm
  • BMH 2843 feed: 11 306 mm | without shank: 1 088 mm
  • roof up/down: 3 010 mm/2 310 mm | over drill centre: 88 mm
  • 1 980 mm
  • 315 mm
  • Hole depth: 2 795 mm
  • Hydraulic pumps: 1 unit | Hydraulic oil tank, volume max: 124 L | Filtration: 20 µm | Water consumption: 40-120 l/min
  • 60 l
  • Automatic differential, limited slip 45% rear axle | Clearance outside axles: 15º
  • Dana 123
  • Dana 123, ±6° oscillation
  • 175 kg | Total: 13 500 kg | Boom side: 8 500 kg | Engine side : 5000 kg
  • Hydraulic Direct Control System, DCS | Basic functions such as anti-jamming included | Rotation system: Separate rotation | Boom: But 28
  • Adapter: R32/R38/T38
  • Articulated steering: ±41° steering angle| Max. lifting angle: +65°/–30° | Boom swing angle L/R: ±35°