2025 Epiroc Production drill rigs Simba M6
- Year 2025
- Make Epiroc
- Model Production drill rigs
2025 Epiroc Production drill rigs Simba M6
2025 Epiroc Production drill rigs Simba M6
Fast, precise rock drillingThe sturdy Simba M6 is a long-hole production drill rig for medium-to-large drift mining with holes ranging from 51 to 178 mm in diameter. It accommodates a range of drill bits, rock drills and in-the-hole hammers to adapt to your specific needs. The rig operator enjoys excellent visibility and enhanced safety in the comfortable cabin. Tele-remote control capability allows for control of one or more machines from a safe and comfortable location. Your Simba M6 can then continue to drill through personnel breaks and shift changes. When you need a hard-working, high-precision solution for long-hole drilling, rely on the powerful Simba M6.
Engine
Rated Engine Speed
Impact rate: 60 Hz
Engine Torque
Torque at 1 300 rpm: 390 Nm
Cooling
Water cooled oil
Drivetrain
Transmission
Hydrostatic transmission: Clark 12000
Brakes
Parking Brake
SAHR
Wheels & Tires
Wheels
Tyres: Michelin 12.00 x R20
Battery
Battery
2 x 12 W, 70 Ah
Electric
Electrical
System: 24 V |Frequency: 50 Hz - 60Hz | Voltage: 380 - 1 000 V | Total installed power: 63 kW | Main motor: 1 x 55 kW
Operational
Operating Speed
Tramming speed: >12.5 km/h | Rotation speed 0-340/ 0-215 rpm
Operating Conditions
Rotation torque, max: 640 / 1 000 Nm | Feed roll-over: 360° | Feed force: 15.0 kN | Boom extension: BUT 28 |
Performance
Noise Level
Sound level: <106 dB(A)
Lights and Safety
Lighting
Tramming lights: LED 8 x 25W, 24V DC | Working lights: LED 4 x 50W, 24V DC
Hydraulics
Hydraulic Pump
jacks, front: 2 extendable | jacks, rear: 2
Maximum Pressure
Hydraulic: 200 bar | System pressure, max: 150 - 230 bar
Dimensions
Length
BMH 2843 feed: 11 306 mm | without shank: 1 088 mm
Height
roof up/down: 3 010 mm/2 310 mm | over drill centre: 88 mm
Width
1 980 mm
Ground Clearance
315 mm
Dimensions
Feed extension: 1 250 mm| Drill rod length: 3 090 mm | Cable reel: 660/1 395mm
Depth, Maximum
Hole depth: 2 795 mm
Capacities
Load Capacity, Water
Hydraulic pumps: 1 unit | Hydraulic oil tank, volume max: 124 L | Filtration: 20 µm | Water consumption: 40-120 l/min
Fuel Capacity
60 l
Axle Count
Automatic differential, limited slip 45% rear axle | Clearance outside axles: 15º
Axle Capacity, Front
Dana 123
Axle Capacity, Rear
Dana 123, ±6° oscillation
Weights
Weight
175 kg | Total: 13 500 kg | Boom side: 8 500 kg | Engine side : 5000 kg
Features
Features
Rotation system: Separate rotation Hydraulic | Direct Control System, DCS | Basic functions such as anti-jamming included | Rotation system: Separate rotation | Boom: But 28
Shank Type
Adapter: R32/R38/T38
Tine Angle Adjustment
Articulated steering: ±41° steering angle| Max. lifting angle: +65°/–30° | Boom swing angle L/R: ±35°