2025 Epiroc Production drill rigs Simba E70 S

2025 Epiroc Production drill rigs Simba E70 S

Swipe to View More

  • Year 2025
  • Make Epiroc
  • Model Production drill rigs
2025 Epiroc Production drill rigs Simba E70 S

2025 Epiroc Production drill rigs Simba E70 S

2025 Epiroc Production drill rigs Simba E70 S

Precise production drilling with higher consistency

The Simba E70 S is the latest upgrade in the Simba range with a clear focus on remote and autonomous control. Putting vehicle electrics under control systems enables a higher degree of machine automation. All improvements on the Simba E70 S aim towards autonomous operations.

Safety

Operator safety is always a top priority, and on the Simba E70 S this has been improved by a higher degree of automation. Live work around energized parts is minimized and the operator becomes more of a process operator.

Carrier Control System - enabler for automation

The entire machine is now managed via control systems, making all the automation features available to combine. When blended together, a higher percentage of tasks can be performed autonomously.

Quality boosting consumables

The Powerbit X drill bit range together with the newly developed ET-series tubes (Epiroc Tubes) highly contribute to increasing the overall hole quality and effectiveness. Straighter drilling, longer service life and easier service planning make the ET-series the obvious next step towards higher quality drilling.

Engine

Engine Torque Torque at 1 300 rpm: 390 Nm
Cooling Water cooled oil

Drivetrain

Transmission Hydrostatic transmission: Clark 12000

Wheels & Tires

Wheels Tyres: Michelin 12.00 x R20

Brakes

Parking Brake SAHR

Battery

Battery 2 x 12 W, 70 Ah | Tramming lights: LED 8 x 25W, 24V DC | Working lights: LED 4 x 50W, 24V DC

Electric

Electrical Impact rate: 60 Hz | System: 24 V | Frequency: 50 Hz - 60Hz | Voltage: 380 - 1 000 V | Total installed power: 63 kW | Main motor: 1 x 55 kW

Operational

Operating Conditions Feed roll-over: 360° | Feed force: 15.0 kN | Feed extension: 1 250 mm| Boom extension: BUT 28 | Rotation torque, max: 640 / 1 000 Nm
Operating Speed Rotation speed 0-340/ 0-215 rpm | Tramming speed: >12.5 km/h

Performance

Noise Level Sound level: <106 dB(A)

Lights and Safety

Lighting

Hydraulics

Hydraulic Pump jacks, front: 2 extendable | jacks, rear: 2
Maximum Pressure Hydraulic: 200 bar | System pressure, max: 150 - 230 bar

Dimensions

Length BMH 2843 feed: 11 306 mm | without shank: 1 088 mm
Height roof up/down: 3 010 mm/2 310 mm | over drill centre: 88 mm
Width 1 980 mm
Ground Clearance 315 mm
Dimensions Drill rod length: 3 090 mm | Cable reel: 660/1 395mm
Depth, Maximum Hole depth: 2 795 mm

Capacities

Load Capacity, Water Hydraulic pumps: 1 unit | Hydraulic oil tank, volume max: 124 L | Filtration: 20 µm | Water consumption: 40-120 l/min
Fuel Capacity 60 l
Axle Count Automatic differential, limited slip 45% rear axle | Clearance outside axles: 15º
Axle Capacity, Front Dana 123
Axle Capacity, Rear Dana 123, ±6° oscillation

Weights

Weight 175 kg | Total: 13 500 kg | Boom side: 8 500 kg | Engine side : 5000 kg

Features

Features Hydraulic Direct Control System, DCS | Basic functions such as anti-jamming included | Rotation system: Separate rotation | Boom: But 28
Shank Type Adapter: R32/R38/T38
Tine Angle Adjustment Articulated steering: ±41° steering angle| Max. lifting angle: +65°/–30° | Boom swing angle L/R: ±35°

Product Photography