2025 Epiroc Production drill rigs Simba E6-W
- Year 2025
- Make Epiroc
- Model Production drill rigs
2025 Epiroc Production drill rigs Simba E6-W
2025 Epiroc Production drill rigs Simba E6-W
Fast, straight and precise rock drillingSimba E6 is a sturdy, stable long hole production drilling rig for large size drifts, using 89 to 254 mm drill bits depending on a variation of rock drills. The Simba E6 gives the operator excellent visibility from the operator safe cabin environment. Simba drill rigs offer a sustainable high-precision solution for long hole drilling. The water-powered drilling solution in conjunction with the well-proven control system gives outstanding performance.
Engine
Engine Torque
Torque max: 3 900-5 100 Nm
Drivetrain
Transmission
Hydrostatic transmission: Clark 12000
Brakes
Brake System Type
Service brakes: 2 separate circuits hydraulically applied, fully enclosed wet disc brakes
Parking Brake
SAHR
Wheels & Tires
Wheels
Tyres: 12.00R20
Battery
Battery
2x70 Ah | Joystick-controlled spotlight right, LED, 1x35 W, 24 V DC
Electric
Electrical
Impact rate: 60 Hz | Halogen working lights, mounted on roof: 2 x 1 000 W | Rig Control System (RCS) – versatile and upgradeable to a higher degree of automation | Transformer 8 kVA | Starting method: star/delta (400–690 V/55 kW) | System: 24 V |Frequency: 50-60 H | Voltage: 400-1000 V | Total installed power: 193 kW
Operational
Operating Speed
Rotation speed: 60–90 rpm | Rotation speed 0-340/ 0-215 rpm | Tramming speed: >12
Operating Conditions
Feed force: 15.0 kN | Boom extension: BUT 28
Lights and Safety
Lighting
Tramming lights: LED 8x24W, 24 V| Working lights: LED, 2x50W, 24 V
Hydraulics
Hydraulic Pump
Front and rear hydraulic jacks
Maximum Pressure
Hydraulic pumps: 55 kW | Hydraulic: max 230 bar| System pressure, max:250 bar
Dimensions
Length
with fixed adapter: 534 mm| without shank: 1 088 mm
Height
roof up/down: 2 960 mm/2 260 mm| over drill centre: 88 mm | tramming 3 180mm
Width
2 350 mm
Ground Clearance
280 mm
Turning Radius
5 440mm/2 890mm
Dimensions
Feed extension: 1 200 mm| Cable reel: 660/1 395 mm | Pipe diameter: 102 mm | Mechanized drilling up to 63 m
Depth, Maximum
Hole depth: 2 795 mm
Capacities
Load Capacity, Water
Water pump, 400 V DC: 130 kW | Capacity: max 350 l/min| Hydraulic oil tank, volume max: 124 L | Filtration: 16 µm | Minimum water inlet pressure: 2 bar
Fuel Capacity
volume max/min: 250/200
Axle Count
Automatic differential, limited slip 45% rear axle | Clearance outside axles: 15° clearance outside axles
Axle Capacity, Front
Front axle, Dana 123
Axle Capacity, Rear
Rear axle, Dana 123, ±6° oscillation
Weights
Weight
164 kg | Total: 17 000| Boom side: 12 700 | Engine side : 4 300
Features
Features
Rotation system: Separate rotation | Mineral hydraulic oil |Water cooled oil cooler in stainless steel |Oil filter indicator | Smart oil leakage shut-down system | Oil temperature gauge on oil tank, electronically supervised | Low oil level indicator and shut-down | Pumps unloaded at start |Hydraulic pumps for rotation, positioning and feed | Cable reel with limit switch |Battery charger |Earth fault indicator | Phase sequence indicator | Digital volt/amperage meter in electric cabinet |Electronic overload protection for electric motors | Exposed components are designed and tested acc. to IP 65 |Drill settings for up to five different drill bits and/or various rock conditio |Angle reading instrument |Integrated diagnostic and statistic system |USB-memory for transfer of data and storage of drill parameters |Water pressure gauge |Recycling system | Air separator/Pulsation damper |Automatic filter surveillance and cleaning | Water booster pump on board
Feed System
BMH 200-Series: BMH 235, total length, 3 300 mm |BMH 200-Series: BMH 236, drill pipe length, 1 800 mm | BMH 200-Series: BMH 235, drill pipe length, 1 800 mm |BMH 200-Series: BMH 236, total length, 3 600 mm
Shank Type
Adapter: R32/R38/T38
Tine Angle Adjustment
Articulated steering: ±41° | Max. lifting angle: +65°/–30° | Boom swing angle L/R: ±35°