2025 Epiroc Production drill rigs Simba 1354

Information

2025 Epiroc Production drill rigs Simba 1354

Powerful production drill

The Simba 1354 provides a high penetration rate in medium-size drifts. In-the-hole hammers and rock drills designed for variable drilling patterns make it easy to adapt this rig to your needs. Stinger up-and-down stabilizes the feed for accurate collaring and drilling. To increase uptime and vehicle life, the rig is designed with easy access to service points for efficient daily checks and maintenance. When you need a hard-working, high-precision rig for long-hole drilling, you can rely on the Simba 1354.

Photos

Highlights

  • Bensalem, Pennsylvania
  • 2025
  • Epiroc
  • Production drill rigs Simba 1354
  • Hydrostatic transmission: Clark 12000
  • Available
  • 2 350 mm
  • roof up/down: 2 960 mm/2 260 mm| over drill centre: 88 mm | tramming 3 180mm

Specifications

  • 2025
  • Epiroc
  • Production drill rigs
  • Simba 1354
  • Horizontal
  • Torque at 1 300 rpm: 390 Nm
  • Water cooled oil
  • Hydrostatic transmission: Clark 12000
  • Service brakes: 2 separate circuits hydraulically applied, fully enclosed wet disc brakes
  • SAHR
  • Tyres: 12.00R20
  • 2x70 Ah | Tramming lights: LED 8x24W, 24 V| Working lights: LED, 2x50W, 24 V | Joystick-controlled spotlight right, LED, 1x35 W, 24 V DC
  • Impact rate: 60 Hz |Electrical Direct System, EDS 18 | Transformer 4 kVA | Starting method: star/delta (380-690 V), direct (1 000 V) | System: 24 V |Frequency: 50-60 H | Voltage: 380-1 000 V | Total installed power: 70 kW (main motor 55 kW) | Main motor: 1 x 55 kW
  • Rotation torque, max: 640 / 1 000 Nm | Rotary Actuator BHR 60-2 for 360° ring drilling| Pendulum arm, BHP 150 gives 1.5 m feed parallel positioning in the side walls. Adds additional 1.5 m feed parallel positioning upwards/downwards. | Rig Alignment Laser RAL650 |Feed force: 15.0 kN | Boom extension: BUT 28 |
  • Rotation speed 0-340/ 0-215 rpm | Tramming speed: >12
  • Front and rear hydraulic jacks
  • Hydraulic: max 230 bar| System pressure, max: 150 - 230 bar
  • Feed extension: 1 250 mm| Cable reel: 660/1 395 mm
  • tramming (with BMH 214/215/216) 8 209/8 486/8 763 | without shank: 1 088 mm
  • roof up/down: 2 960 mm/2 260 mm| over drill centre: 88 mm | tramming 3 180mm
  • 2 350 mm
  • 280 mm
  • 5 440mm/2 890mm
  • Hole depth: 2 795 mm
  • Min water inlet pressure 2 bar | Electric water booster pump, Lowara, FLYGT 5SV, capacity max 100 L/min at 10 bar| Hydraulic oil tank, volume max: 124 L | Filtration: 10 µm | Water injection pump, HASKEL, ATV-4, capacity 50 L/min
  • Automatic differential, limited slip 45% rear axle | Clearance outside axles: 15° clearance outside axles
  • Front axle, Dana 123
  • Rear axle, Dana 123, ±6° oscillation
  • 215 L
  • Total: 17 000| Boom side: 12 700 | Engine side : 4 300
  • Rotation system: Separate rotation | Basic functions such as semi-automatic drilling and antijamming included | Full color 4.3-inch LCD display | Central lubrication system |Horn, beacon and reverse alarm | Brake lights |Illuminated stairs for platform LED | Automatic differential lock on front and rear axles, limited slip|Hydraulic power steering system |FOPS certified protective canopy | Four-wheel drive|Fixed seat for tramming, including safety belt |Air flow guard |Adjustable flow/pressure |Air pressure gauge |Lubricated air for the rock drill |Basic functions such as semi-automatic drilling and antijamming included | Dual controls for cable reel| Limit switch for cable reel with signal lamp and brake connection|Battery charger | Phase sequence and earth fault indicator |Digital voltmeter/amperage meter in electric cabinet | Percussion hour meter on panel of electric cabinet |Thermal overload protection for electric motors | Ni-Cr plated piston rods (limitations exist)| Electrical hydraulic oil filling pum|Mineral hydraulic oil |Oil filter indicator |Water/oil cooler in stainless steel |Hydraulic oil thermostat | Oil temperature gauge| Low oil level indicator including shut down|Pumps unloaded at start |Hydraulic pump for rotation |Hydraulic pump for percussion, positioning and feed |Water flow guard | Water pressure gauge|Central lubrication for drilling and positioning unit |Rig Alignment Laser RAL650 |Pendulum arm, BHP 150 gives 1.5 m feed parallel positioning in the side walls. Adds additional 1.5 m feed parallel positioning |Sliding table BHT 150 gives 1.5 m feed parallel positioning |Rock drill lubrication warning kit |External air supply connection for hole blowing kit
  • Air pressure gauge | Capacity max. at 7 bar: 4.4 L/s | Lub. air consump. at 2 bar: 5 l/s | Electronically driven piston Compressor: Compressor:Atlas Copco LE7, capacity 12 L/s at 5 400 rpm and 7 bar
  • Adapter: R32/R38/T38
  • Articulated steering: ±41° | Max. lifting angle: +65°/–30° | Boom swing angle L/R: ±35°