2025 Epiroc Production drill rigs Simba 1354
- Year 2025
- Make Epiroc
- Model Production drill rigs
2025 Epiroc Production drill rigs Simba 1354
2025 Epiroc Production drill rigs Simba 1354
Powerful production drillThe Simba 1354 provides a high penetration rate in medium-size drifts. In-the-hole hammers and rock drills designed for variable drilling patterns make it easy to adapt this rig to your needs. Stinger up-and-down stabilizes the feed for accurate collaring and drilling. To increase uptime and vehicle life, the rig is designed with easy access to service points for efficient daily checks and maintenance. When you need a hard-working, high-precision rig for long-hole drilling, you can rely on the Simba 1354.
Engine
Engine Torque
Torque at 1 300 rpm: 390 Nm
Cooling
Water cooled oil
Drivetrain
Transmission
Hydrostatic transmission: Clark 12000
Brakes
Brake System Type
Service brakes: 2 separate circuits hydraulically applied, fully enclosed wet disc brakes
Parking Brake
SAHR
Wheels & Tires
Wheels
Tyres: 12.00R20
Battery
Battery
2x70 Ah | Tramming lights: LED 8x24W, 24 V| Working lights: LED, 2x50W, 24 V | Joystick-controlled spotlight right, LED, 1x35 W, 24 V DC
Electric
Electrical
Impact rate: 60 Hz |Electrical Direct System, EDS 18 | Transformer 4 kVA | Starting method: star/delta (380-690 V), direct (1 000 V) | System: 24 V |Frequency: 50-60 H | Voltage: 380-1 000 V | Total installed power: 70 kW (main motor 55 kW) | Main motor: 1 x 55 kW
Operational
Operating Conditions
Rotation torque, max: 640 / 1 000 Nm | Rotary Actuator BHR 60-2 for 360° ring drilling| Pendulum arm, BHP 150 gives 1.5 m feed parallel positioning in the side walls. Adds additional 1.5 m feed parallel positioning upwards/downwards. | Rig Alignment Laser RAL650 |Feed force: 15.0 kN | Boom extension: BUT 28 |
Operating Speed
Rotation speed 0-340/ 0-215 rpm | Tramming speed: >12
Lights and Safety
Lighting
Hydraulics
Hydraulic Pump
Front and rear hydraulic jacks
Maximum Pressure
Hydraulic: max 230 bar| System pressure, max: 150 - 230 bar
Dimensions
Length
tramming (with BMH 214/215/216) 8 209/8 486/8 763 | without shank: 1 088 mm
Height
roof up/down: 2 960 mm/2 260 mm| over drill centre: 88 mm | tramming 3 180mm
Width
2 350 mm
Ground Clearance
280 mm
Turning Radius
5 440mm/2 890mm
Dimensions
Feed extension: 1 250 mm| Cable reel: 660/1 395 mm
Depth, Maximum
Hole depth: 2 795 mm
Capacities
Load Capacity, Water
Min water inlet pressure 2 bar | Electric water booster pump, Lowara, FLYGT 5SV, capacity max 100 L/min at 10 bar| Hydraulic oil tank, volume max: 124 L | Filtration: 10 µm | Water injection pump, HASKEL, ATV-4, capacity 50 L/min
Axle Count
Automatic differential, limited slip 45% rear axle | Clearance outside axles: 15° clearance outside axles
Axle Capacity, Front
Front axle, Dana 123
Axle Capacity, Rear
Rear axle, Dana 123, ±6° oscillation
Fuel Capacity
215 L
Weights
Weight
Total: 17 000| Boom side: 12 700 | Engine side : 4 300
Features
Features
Rotation system: Separate rotation | Basic functions such as semi-automatic drilling and antijamming included | Full color 4.3-inch LCD display | Central lubrication system |Horn, beacon and reverse alarm | Brake lights |Illuminated stairs for platform LED | Automatic differential lock on front and rear axles, limited slip|Hydraulic power steering system |FOPS certified protective canopy | Four-wheel drive|Fixed seat for tramming, including safety belt |Air flow guard |Adjustable flow/pressure |Air pressure gauge |Lubricated air for the rock drill |Basic functions such as semi-automatic drilling and antijamming included | Dual controls for cable reel| Limit switch for cable reel with signal lamp and brake connection|Battery charger | Phase sequence and earth fault indicator |Digital voltmeter/amperage meter in electric cabinet | Percussion hour meter on panel of electric cabinet |Thermal overload protection for electric motors | Ni-Cr plated piston rods (limitations exist)| Electrical hydraulic oil filling pum|Mineral hydraulic oil |Oil filter indicator |Water/oil cooler in stainless steel |Hydraulic oil thermostat | Oil temperature gauge| Low oil level indicator including shut down|Pumps unloaded at start |Hydraulic pump for rotation |Hydraulic pump for percussion, positioning and feed |Water flow guard | Water pressure gauge|Central lubrication for drilling and positioning unit |Rig Alignment Laser RAL650 |Pendulum arm, BHP 150 gives 1.5 m feed parallel positioning in the side walls. Adds additional 1.5 m feed parallel positioning |Sliding table BHT 150 gives 1.5 m feed parallel positioning |Rock drill lubrication warning kit |External air supply connection for hole blowing kit
Air Filter
Air pressure gauge | Capacity max. at 7 bar: 4.4 L/s | Lub. air consump. at 2 bar: 5 l/s | Electronically driven piston Compressor: Compressor:Atlas Copco LE7, capacity 12 L/s at 5 400 rpm and 7 bar
Shank Type
Adapter: R32/R38/T38
Tine Angle Adjustment
Articulated steering: ±41° | Max. lifting angle: +65°/–30° | Boom swing angle L/R: ±35°