2025 Epiroc Face drill rigs Boomer M1 L
- Year 2025
- Make Epiroc
- Model Face drill rigs
2025 Epiroc Face drill rigs Boomer M1 L
Low profile drillingBoomer M1 L is a robust, hydraulic face drilling rig suitable for low-to-medium height applications with cross sections up to 36 m2. This rig boasts a strong BUT 29 boom and a COP rock drill for optimized productivity. The robust articulated carrier is designed for fast tramming and easy maneuvering in narrow tunnels and drifts. The low-emission diesel engine provides powerful performance with less environmental impact. When you need high performance drilling in low vein mines, you can rely on Boomer M1 L.
Wheels & Tires
							Wheels
							Tyres: 12.00xR24 | Tubeless tires (Michelin X MINE D2)
						
						Battery
							Battery
							2x12 V, 125 Ah
						
						Electric
							Electrical
							Transformer 4 kVA | Starting method: star/delta 380–690 V, direct start 1000 V | System: 24 V |Frequency: 50-60 Hz | Voltage: 380-1 000 V | Total installed power: 59 kW | Main motor: 55 kW
						
						Operational
							Operating Conditions
							Boom: BUT 29R
						
						Performance
							Noise Level
							Sound level:123 dB(A) re 1 pW | Operator sound pressure level in canopy, drilling, free field (ISO 11201): 75±3 dB(A) re 20 uPa
						
						Hydraulics
							Hydraulic Pump
							Front and rear hydraulic jacks
						
						Lights and Safety
							Lighting
							Tramming lights: 8x35 W Xenon, 24 V DC | Working lights: 6x40 W LED, 24 V DC
						
						Dimensions
							Length
							with BMH 2837 feed: 13 570 mm| without shank: 1 088 mm 
						
						
							Height
							with cabin: 1 800 mm |  roof up/down: 3 091/2 375 mm
						
						
							Width
							2 400 mm
						
						
							Ground Clearance
							378 mm
						
						
							Dimensions
							Drill rod length: 3 090 mm | Cable reel: 1 600 mm
						
						
							Turning Radius
							6 550/3 800 mm
						
						Capacities
							Axle Count
							Automatic differential lock on front axle | Clearance outside axles: 15°
						
						
							Axle Capacity, Front
							Dana 114
						
						
							Axle Capacity, Rear
							Dana 114, ±8° oscillation
						
						
							Load Capacity, Water
							Hydraulic water booster pump capacity at 12 bar, 66 l/m | Filtration: 16 µm| Min water inlet pressure at 200 l/min at preferred pressure of 2 bar | Water booster pump: capacity at 15 bar: 250 l/min
						
						
							Fuel Capacity
							110 l
						
						Weights
							Weight
							175 kg | Total: 16 500 kg | Boom side: 9 000 kg | Engine side: 7 500 kg
						
						Features
							Features
							Four wheel drive  | Dual controls for cable reel | Percussion hour meter | Battery charger | Battery remote switch | IP56 rating on all electrical cabinets/boxes (Except diesel starter motor and alternator) | Phase sequence and eart fault indicator | Digital volt/ampere meter in electrical cabinet |Electronic overload protection for electric motors  | Hydraulic oil thermostat | Water/oil cool |Oil temperature meter | Oil filter indicator | Mineral hydraulic oil | Electric oil filling pump | Rock drill lubrication warning kit | Big hole drilling system | Low oil level indicator
						
						
							Shank Type
							Adapter: Diameter 38 mm | Length 435 mm
						
						
							Tine Angle Adjustment
							Articulated ±40° steering angle
						
					 
					