2025 Epiroc Face drill rigs Boomer 282
- Year 2025
- Make Epiroc
- Model Face drill rigs
2025 Epiroc Face drill rigs Boomer 282
2025 Epiroc Face drill rigs Boomer 282
High productivity drillThe Boomer 282 is a hydraulically controlled mining and tunneling face drilling rig with two booms, adaptable to various heading sizes. This rig is designed for reliable and highly efficient development in medium sized underground cross sections. Robust design allows for fast positioning, a high penetration rate, straight holes, superior durability and lower drill steel cost. All this adds up to increased productivity, lower operation cost and easier maintenance and troubleshooting with the Boomer 282.
Engine
Engine Power
Power rating at 2 300 rpm: 55.4 kW (75 hp)
Engine Torque
Torque at 1 300 rpm: 390 Nm
Cooling
Water cooled oil
Drivetrain
Transmission
Hydrostatic transmission: Clark 12 000
Brakes
Brake System Type
Service brakes: 2 separate circuits
Parking Brake
SAHR
Wheels & Tires
Wheels
Tyres: Michelin 12.00xR20
Battery
Battery
2 x 70 Ah
Electric
Electrical
Impact rate: 60 Hz |System: 24 V | Transformer: 3.9 kVA | Frequency: 50–60 Hz | Voltage: 380–1 000 V | Total installed power: 125 kW | Main motor: 2x55 kW
Operational
Operating Conditions
Rotation torque, max: 640 / 1000 Nm |Feed roll-over: 360° | Feed force: 15.0 kN | Feed extension: 1 250 mm| Boom extension: 1 250 mm| Boom: BUT 28 |
Operating Speed
Rotation speed: 0-340/0-215 rpm | Tramming speed: >12.5 km/h
Performance
Noise Level
Sound level: <106 dB(A)
Hydraulics
Hydraulic Pump
jacks, front: 2 extendable | jacks, rear: 2
Maximum Pressure
Hydraulic: 200 bar | System pressure, max: 230 bar
Lights and Safety
Lighting
Tramming lights: LED 8x25W, 24 V DC | Working lights: LED 4x50W, 24 V DC
Dimensions
Length
Total: 4 594 mm | BMH 2843 feed: 11 306 mm | without shank: 1 008 mm | Drill rod length: 3 090 mm
Height
roof up/down: 3 010 mm/2 310 mm | over drill centre: 88 mm
Width
1 980 mm
Ground Clearance
315 mm
Dimensions
Drill rod length: 3 090 mm | Cable reel: 660/1 395 mm
Depth, Maximum
Hole depth: 2 775 mm
Capacities
Load Capacity, Water
Min water inlet pressure: 2 bar | Water booster pump max capacity at 13.5 bar: 100 L/min | Electronically driven water booster pump: Lowara 10SV13F055 | Hydraulic pumps: 2 separate units, one for each boom | Hydraulic oil tank, volume max: 195 L | Filtration: 16 µm | Water consumption: 40-120 l/min
Fuel Capacity
60 l
Axle Count
Automatic differential, limited slip 45% rear axle | Clearance outside axles: 15°
Axle Capacity, Front
Dana 123
Axle Capacity, Rear
Dana 123, ±6° oscillation
Weights
Weight
175 kg | Total: 13 500 kg | Boom only : 1 750 kg | Engine side : 5000 kg | incl. drill: 475 kg
Features
Features
Rotation system: Separate rotation | Hydraulic Direct Control System, DCS | Basic functions such as anti-jamming included | Rotation system: Separate rotation | Boom: But 28
Shank Type
Adapter: R38/T38
Tine Angle Adjustment
Articulated steering: ±41° steering angle| Max. lifting angle: +65°/–30° | Max. swinging angle: +45°/-25°