2020 Atlas Copco ErgoPulse XS EP20XS HR20
- Year 2020
- Make Atlas Copco
- Model ErgoPulse XS
2020 Atlas Copco ErgoPulse XS EP20XS HR20
2020 Atlas Copco ErgoPulse XS EP20XS HR20
High power and excellent durabilityAtlas Copco’s non shut-off tool ErgoPulse XS is the ideal choice when the operator needs to control the process. The tool is optimized to provide high torque, fast and accurate tightenings as well as an extremely long service life. Its twin chamber motor is designed to give high torque at low speed, which provides the best characteristics for fast, reliable and accurate tightening.
Features may include:- High power-to-weight ratio
- One handed operation
- Double or triple bladed pulse mechanisms
- Equipped with pulse units with two or three blades
- No springs to wear out
- High precision components
- Lubrication free
- Enhanced productivity
- Reliable and fast
- Short cycle times
- Excellent durability
- Low noise levels
Motor
Motor Torque
Torque range max: 400 Nm (295 ft lb) / min: 300 Nm (221 ft lb)
Operational
Operating Conditions
Air consumption under load: 34 cfm (16 l/s) | Vibration uncertainty: 1.4 m/s² | Vibration value: 6.8 m/s²
Operating Speed
Free: 3700 r/min
Performance
Noise Level
Sound pressure: 87 dB(A) | Sound uncertainty: 3 dB(A) | Sound power: 100 dB(A)
Hydraulics
Maximum Pressure
Working: 7.0 bar (100 psig) | Nominal working: 6.3 bar (91 psi)
Dimensions
Dimensions
Air inlet thread: 3/8 inch | Bolt size: M20 mm | CS distance: 43 mm | Recommended hose size: 13 mm | Square drive: 3/4 inch
Length
240 mm
Weights
Weight
11.2 lb (5.1 kg)
Features
Features
Model type: Straight