2020 Atlas Copco Controller Focus Focus 60

Information

2020 Atlas Copco Controller Focus Focus 60

Traceability inside manual tools

In combination with the Controller Focus 61 the MWR mechatronic system offers controlled tightening possibilities and complete monitoring of torque and angle. The Focus controller manages the process and collects data reporting all results in real time for full traceability, while managers can monitor everything via ToolsNet or to customer software. An optional stacklight connected to the Focus controller signals the status or any error of the tightening and Digital I/O.

Features may include:
  • Back up and configuration in SD cards
  • Full integration with ToolsNet
  • Integration with SQS
  • AOP communication (open to any developer)
  • Several customer’s protocols
Benefits
  • Easy to integrate, use, service and upgrade
  • Reliable, always up-to-date programming strategies
  • Safe data backup
  • Error proofing
  • Suitable to customer’s needs

Photos

Highlights

  • Bensalem, Pennsylvania
  • 2020
  • Atlas Copco
  • Controller Focus Focus 60
  • Available
  • 5.79 inch (147 mm)
  • 8.62 inch (219 mm)

Specifications

  • 2020
  • Atlas Copco
  • Controller Focus
  • Focus 60
  • General
  • Max input current: 0.7 A | Rated voltage: 100-240 V | Rated voltage frequency: 50-60 Hz
  • Ambient: 40 °C | Min: 5
  • 8.62 inch (219 mm)
  • 4.76 inch (121 mm)
  • 5.79 inch (147 mm)
  • Function: Focus | Ingress protection rating: IP21 | WEEE: 5 - Small equipment <50cm